DF205 Waraaqda Dhalada ah ee Melamine ee la Habeeyay
DF205 Waraaqda Dhalada ah ee Melamine ee la Habeeyaywaxay ka kooban tahay maro quraarad tolan ah oo uur leh oo lagu xidhay resin heerkulbeeg melamine ah, oo lagu daboolay heerkul sare iyo cadaadis sare. Maro dhalada ah ee tidcan waa inay ahaato mid aan alkali lahayn.
Iyada oo leh qalab sare oo farsamo iyo dielectric ah iyo caabbinta arc aad u fiican, xaashida waxaa loogu talagalay qalabka korantada sida qaybo qaab dhismeedka dahaarka, halkaas oo caabbinta sare ee loo baahan yahay. Waxay kaloo dhaaftay ogaanshaha walxaha sunta iyo khatarta ah (RoHS Report). Waxay u dhigantaa xaashida NEMA G5,MFGC201, Hgw2272.
Dhumucda la heli karo:0.5mm ~ 100mm
Cabbirka xaashida la heli karo:
1500mm * 3000mm, 1220mm * 3000mm, 1020mm * 2040mm, 1220mm * 2440mm, 1000mm * 2000mm iyo cabbirada kale gorgortanka.
Dhumucda Magaca iyo Dulqaadka La Ogolyahay (mm)
| Dhumucda magacaaban | leexasho | Dhumucda magacaaban | leexasho | Dhumucda magacaaban | leexasho |
| 0.5 | +/- 0.15 | 3 | +/-0.37 | 16 | +/- 1.12 |
| 0.6 | +/- 0.15 | 4 | +/- 0.45 | 20 | +/- 1.30 |
| 0.8 | +/-0.18 | 5 | +/-0.52 | 25 | +/- 1.50 |
| 1 | +/-0.18 | 6 | +/- 0.60 | 30 | +/- 1.70 |
| 1.2 | +/-0.21 | 8 | +/- 0.72 | 35 | +/- 1.95 |
| 1.5 | +/-0.25 | 10 | +/- 0.94 | 40 | +/- 2.10 |
| 2 | +/-0.30 | 12 | +/- 0.94 | 45 | +/- 2.45 |
| 2.5 | +/-0.33 | 14 | +/- 1.02 | 50 |
U leexinta xaashida (mm)
| Dhumucda | leexashada leexin | |
| 1000 (dhererka xukunka) | 500 (dhererka xukunka) | |
| 3.0 ilaa 6.0 | ≤10 | ≤2.5 |
| 6.1 ilaa 8.0 | ≤8 | ≤2.0 |
| 8.0 | ≤6 | ≤1.5 |
Farsamaynta Makaanikada
Go'yaalku waa inay xor ka ahaadaan dildilaacyo iyo xoqin ka dib marka la farsameeyo (feer iyo xiirid).
Qalabka Jirka, Makaanikada iyo Korontada
| Maya | Guryaha | Unug | Qiimaha caadiga ah | Qiimaha caadiga ah | ||
| 1 | Cufnaanta | g/cm3 | 1.90 ilaa 2.0 | 1.95 | ||
| 2 | nuugista biyaha (3mm) | mg | Eeg shaxda soo socota | 5.7 | ||
| 3 | Xoog dabacsanaan, oo siman ilaa lamination (dherer ahaan) | Xaalad caadi ah | MPa | ≥270 | 471 | |
| 4 | Awoodda saamaynta (Carpy, notch, lengthwise) | kJ/m2 | ≥37 | 66 | ||
| 5 | Xoog xajin | MPa | ≥150 | 325 | ||
| 6 | Xoog cadaadis leh | MPa | ≥200 | 309 | ||
| 7 | Xabagta/xoogga curaarta | N | ≥2000 | 4608 | ||
| 8 | Xoog xiirid, oo la siman laminations | MPa | ≥30 | 33.8 | ||
| 9 | Awoodda Dielectric, si toos ah laminations (ku jira saliidda beddelka ee 90 ℃ +/- 2 ℃) | MV/m | ≥14.2 | 20.4 | ||
| 10 | Korontada burburka, oo la mid ah laminations (saliid transformer at 90 ℃ +/- 2 ℃) | kV | ≥30 | 45 | ||
| 11 | Iska caabbinta dahaarka, oo la siman laminations | Xaalad caadi ah | Ω | ≥1.0 x 1010 | 4.7 x 1014 | |
| Kadib 24 saacadood oo biyo ah | ≥1.0 x 106 | 2.9 x 1014 | ||||
| 12 | Cunsurka dielectric dissipition factor 1MHz | -- | ≤0.02 | 0.015 | ||
| 13 | Dielectric joogto ah 1 MHz | -- | ≤5.5 | 4.64 | ||
| 14 | Iska caabin Arc | s | ≥180 | 184 | ||
| 15 | Iska caabinta raadraaca | PTI | V | ≥500 | PTI500 | |
| CTI | ≥500 | CTI600 | ||||
| 16 | Daboolida | Darajo | V-0 | V-0 | ||
Nuugista Biyaha
| Celceliska dhumucda shaybaarada (mm) | nuugista biyaha (mg) |
Celceliska dhumucda shaybaarada (mm)
| nuugista biyaha (mg) |
Celceliska dhumucda shaybaarada (mm)
| nuugista biyaha (mg) |
| 0.5 | ≤17 | 2.5 | ≤21 | 12 | ≤38 |
| 0.8 | ≤18 | 3.0 | ≤22 | 16 | ≤46 |
| 1.0 | ≤18 | 5.0 | ≤25 | 20 | ≤52 |
| 1.6 | ≤19 | 8.0 | ≤31 | 25 | ≤61 |
| 2.0 | ≤20 | 10 | ≤34 | Wixii xaashi ka dhumuc weyn 25mm, waa in lagu farsameeyaa 22.5mm hal dhinac. | ≤73 |
| Hadalo:1 Fikrado: Haddii celceliska la qiyaasay ee dhumucda la qiyaasay uu u dhexeeyo laba dhumucood oo lagu sheegay shaxdan, qiyamka waxa lagu soo qaadan doonaa is dhexgal. Haddii celceliska la qiyaasay ee dhumucda la qiyaasay uu ka yar yahay 0.5mm, dooxyadu kama badnaan doonaan 17mg. Haddii celceliska dhumucda la qiyaasay uu ka sarreeyo 25mm, qiimahu kama badnaan doono 61mg.2 Dhinaca mashiinka lagu farsameeyay waa inuu ahaadaa mid siman. | |||||
Baakadaha iyo Kaydinta
Go'yaasha waa in lagu kaydiyaa meel heerkulkeedu aanu ka sarreyn 40℃, waxaana lagu dhejiyaa si toosan sariirta sariirta oo dhererkeedu yahay 50mm ama ka badan. Ka fogow dabka, kulaylka (qalabka kulaylinta) iyo qorraxda tooska ah. Nolosha kaydinta xaashida waa 18 bilood laga bilaabo taariikhda ka bixitaanka warshadda. Haddii muddada kaydinta ay ka badan tahay 18 bilood, badeecada sidoo kale waa la isticmaali karaa ka dib marka la tijaabiyo si loogu qalmo.
Fikradaha iyo taxaddarrada codsiga
1 Xawaaraha sare iyo qoto dheer ee goynta yar waa in lagu dabaqaa marka mishiinada la samaynayo sababtoo ah xaashida kulaylka daciifka ah.
2 Mashiinka iyo goynta alaabtan waxay sii dayn doontaa boodh iyo qiiq badan. Tallaabooyin ku habboon waa in la qaado si loo hubiyo in heerarka boodhka ay ku jiraan xad la aqbali karo inta lagu jiro hawlgallada. Hawo-qaadka qiiqa maxalliga ah iyo isticmaalka boodhka/maaskarada ku habboon ayaa lagula talinayaa.
3 Go'yaalku waxay ku xiran yihiin qoyaan ka dib marka mashiinada la sameeyo, dahaarka dahaarka ayaa lagu talinayaa.
Qalabka Wax-soo-saarka
Xidhmada Waraaqaha Dahaaran
