Shiinaha Shiinaha OEM xaashida kulaylka ee Fiberglass Sheet G10 G11 Epgc308 saarayaasha iyo dhoofiyaha

Shiinaha OEM xaashida kulaylka xaashida Fiberglass G10 G11 Epgc308

Shiinaha OEM xaashida kuleylka ee Fiberglass Sheet G10 G11 Epgc308 Sawirka

sharaxaad gaaban:

Taxanaha EPGC Epoxy Glass Maro adag oo dahaadhay wuxuu ka kooban yahay maro dhalada ah oo tolan oo ay ku jirto resin heerkulbeeg ah, oo lagu daboolay heerkul sare iyo cadaadis sare. Maro dhalada tidcan waa inay noqotaa mid aan alkali lahayn oo lagu daaweeyaa lammaane silane. EPGC xaashida taxanaha ah waxaa ka mid ah EPGC201 (NMEMA G10), EPGC202(NEMA FR4), EPGC203(NEMA G11), EPGC204 (NEMA FR5), EPGC306 iyo EPGC308.

Email noogu soo dir

Faahfaahinta Alaabta

Tags Product

Waxaan had iyo jeer ku siinnaa mid ka mid ah adeeg bixiyayaasha macmiilka ee ugu damiirka badan, iyo sidoo kale noocyo kala duwan oo naqshado iyo qaabab leh agabka ugu wanaagsan. Hindisahan waxaa ka mid ah helitaanka naqshadaha la isku habeeyay ee xawaaraha iyo dirista Shiinaha OEM Thermal Sheet Fiberglass Sheet G10 G11 Epgc308, Daacadnimada waa mabda'ayada, hawlgalka xirfadeed waa shaqadeena, adeeggu waa hadafkeena, iyo qanacsanaanta macaamiisha waa mustaqbalkeena!
Waxaan had iyo jeer ku siinnaa mid ka mid ah adeeg bixiyayaasha macmiilka ee ugu damiirka badan, iyo sidoo kale noocyo kala duwan oo naqshado iyo qaabab leh agabka ugu wanaagsan. Waxqabadyadan waxaa ka mid ah helitaanka nashqado la habeeyey oo leh xawaare iyo dirisShiinaha Epoxy Epgc202 Sheet iyo Fr4 Sheet, Ahaanshaha xalalka ugu sarreeya ee warshadeena, xalalkayada taxanaha ah ayaa la tijaabiyey oo nagu guuleystey shahaadooyin maamul oo khibrad leh. Si aad u hesho cabbiro dheeraad ah iyo faahfaahinta liiska shayga, hubi inaad gujiso badhanka si aad u hesho macluumaad dheeraad ah.

Xaashiyaha EPGC (class thermal: B～H), oo loo soo saaray sida ku cad IEC60893-3-2. Xaashiyahani waxay leeyihiin awood farsamo oo heer sare ah (heerka haynta xoogga kuleylku waxay gaari kartaa in ka badan 50%) heerkul dhexdhexaad ah ama heerkulbeeg, iyo sidoo kale hantida korantada ee deggan (caabbinta dahaarka ka dib marka la geliyo 1012Ω) xaalad qoyaan sare leh. Iyo sidoo kale adkeysi sare / adkeysi danab (ka badan 35kV), oo barbar socda lamination. EPGC202, EPGC204 iyo EPGC306 sidoo kale waxay leeyihiin hanti dib u celisa ololka oo aad u fiican. Xaashiyaha ayaa sidoo kale gudbiyay ogaanshaha walxaha sunta iyo halista ah (oo leh Warbixinta RoHS).

Loo isticmaalo sida qaybaha qaab dhismeedka dahaarka ee Class BH matoorada korontada, qalabka korontada, kuwaas oo leh shuruudaha caabbinta ololka ama aan, ama codsiyada kale.

Dhumucda la heli karo:0.30mm ~ 200mm

Cabbirka xaashida la heli karo:
1500mm * 3000mm, 1220mm * 3000mm, 1020mm * 3000mm, 1020mm * 2440mm, 1220mm * 2440mm, 1500mm * 2440mm, 1000mm * 20000mm kale

WPS图片-修改尺寸(LJK)
SMC-4(1)

Kala-soocidda iyo Nooca Xaashiyaha Epgc

Nooca magaca				Codsiga & sifada	Heerka kulaylka
D&F	GB/IEC	NEMA	kuwa kale	Codsiga & sifada	Heerka kulaylka
DF201	EPGC201	G10	Hgw 2372	Mashiinnada, qalabka korontada iyo elektarooniga. Iyada oo leh awood sare oo hooseysa heerkul dhexdhexaad ah, iska caabin aad u fiican iyo PTI iyo CTI sare	B 130℃
DF202	EPGC202	FR-4	Hgw 2372.1,F881	Si la mid ah EPGC201, lahaanshaha dab-demiska la sheegay.	B 130℃
DF202A	-	-	-	Si la mid ah DF202, laakiin leh awood farsamo sare leh.	B 130℃
DF203	EPGC203	G11	Hgw2372.4	Wixii makaanikada, qalabka korontada iyo elektarooniga. Iyada oo xoogga ugu sarreeya hoostiisa heerkulka dhexe	F 155 ℃
DF204	EPGC204	FR-5	Hgw 2372.2	Si la mid ah DF203, lahaanshaha dab-demiska la sheegay.	F 155 ℃
DF306	EPGC306	-	DF336	Si la mid ah DF203, lahaanshaha iska caabin olol aad u fiican, iska caabin arc iyo PTI sare.	F 155 ℃
DF306A	-	-	-	Si la mid ah DF306, laakiin lahaanshaha awood farsamo sare leh.	F 155 ℃
DF308	EPGC308	-	-	La mid ah DF203, laakiin leh xasillooni kulaylka oo ka wanaagsan.	H 180 ℃

Shuruudaha Farsamada

Muuqashada
Dusha xaashidu waa inay ahaato mid fidsan oo siman, oo aan lahayn xumbo hawo, laalaab ama dildilaac oo si macquul ah aanay lahayn cilladaha yaryar ee kale sida xagashada, jeexjeexyada, iwm Midabku waa inuu noqdaa mid la mid ah, laakiin dhawr wasakh ayaa la oggol yahay.

Dhumucda magacaaban iyo dulqaadkaCutubka: mm

Dhumucda magacaaban

leexasho

Dhumucda ugu yar

leexasho

0.5,0.6

0.8, 1.0

1.2

1.5

2.0

2.5

3.0

4.0

5.0

6.0

8.0

+/- 0.15

+/-0.18

+/-0.21

+/-0.25

+/-0.30

+/-0.33

+/-0.37

+/- 0.45

+/-0.52

+/- 0.60

+/- 0.72

+/-0.82

+/- 0.94

+/- 1.02

+/- 1.12

+/- 1.30

+/- 1.50

+/- 1.70

+/- 1.85

+/- 2.10

+/- 2.45

+/- 2.60

+/- 2.80

Fikrado: Waraaqaha dhumucda aan magacaw lahayn ee aan shaxdan ku xusnayn, weecasho la ogolyahay waa in ay la mid noqoto dhumucda soo socota

U leexashada xaashidaCutubka: mm

Dhumucda

leexashada leexsan

3.0 ilaa 6.0

6.0-8.0

8.0

≤10

≤8

≤6

farsamaynta makaanikada:
Go'yaalku waa inay xor ka ahaadaan dildilaaca iyo burburka marka mashiinada sida miinada, qodista, dhaqidda iyo wax-shiidka la mariyo.

Qalabka Jirka, Makaanikada iyo Korontada

Maya	Guryaha		Unug	EPGC201		EPGC202		EPGC203
Maya	Guryaha		Unug	Qiimaha caadiga ah	Qiimaha caadiga ah	Qiimaha caadiga ah	Qiimaha caadiga ah	Qiimaha caadiga ah	Qiimaha caadiga ah
1	nuugista biyaha (2mm sheet)		mg	≤20	8	≤20	9	≤20	9
2	Xoog dabacsanaan	Xaalad caadi ah	MPa	≥340	460	≥340	500	≥340	450
2	(dherer ahaan)	155 ℃+/-2 ℃	MPa	-	-	-	-	≥170	240
3	Awood saamayn leh, oo la mid ah lamination (Charpy, notch)		kJ/m2	≥33	53	≥33	51	≥33	50
4	Awood koronto, oo u dhiganta laminations (ku jira saliidda beddelka ee 90 ℃ +/- 2 ℃)		kV/mm	≥11.8	17	≥11.8	17	≥11.8	18
5	Awood koronto, oo la mid ah laminations (ku jira saliidda beddelka ee 90 ℃ +/- 2 ℃)		kV	≥35	48	≥35	45	≥35	45
6	Cunsurka dielectric dissipition factor (1MHz)		-	≤0.04	0.02	≤0.04	0.02	≤0.04	0.021
7	Dielectric joogto ah (1 MHz)		-	≤5.5	4.8	≤5.5	4.7	≤5.5	4.7
8	Iska caabin Arc		s	-	-	-	182	-	182
9	Caddaynta iska caabbinta dabagalka (PTI)		V	-	-	-	600	-	600
10	Iska caabbinta dahaarka ka dib marka la geliyo biyaha		MΩ	≥5.0×104	2.1 x107	≥5.0×104	1.5 x106	≥5.0×104	1.1 x107
11	Daboolida		Darajo	-	-	V-0	V-0	-	-
12	Tilmaanta Heerkulka (TI)		-	≥130		≥130		≥155
Maya	Guryaha		Unug	EPGC204		EPGC306		EPGC308
Maya	Guryaha		Unug	Qiimaha caadiga ah	Qiimaha caadiga ah	Qiimaha caadiga ah	Qiimaha caadiga ah	Qiimaha caadiga ah	Qiimaha caadiga ah
1	nuugista biyaha (2mm)		mg	≤20	11	≤20	8	≤20	9
2	Xoog dabacsanaan	Xaalad caadi ah	MPa	≥340	480	≥340	460	≥340	500
2	(dhanka dheer)	155 ℃+/-2 ℃	MPa	≥170	260	≥170	280	-	270
3	Awood saamayn leh, oo la mid ah lamination (Charpy, notch)		kJ/m2	≥33	51	≥33	53	≥33	52
4	Awood koronto, oo u dhiganta laminations (ku jira saliidda beddelka ee 90 ℃ +/- 2 ℃)		kV/mm	≥11.8	16	≥11.8	17	≥11.8	18
5	Awood koronto, oo la mid ah laminations (ku jira saliidda beddelka ee 90 ℃ +/- 2 ℃)		kV	≥35	45	≥35	48	≥35	45
6	Cunsurka dielectric dissipition factor (1MHz)		-	≤0.04	0.018	≤0.04	0.02	≤0.04	0.02
7	Dielectric joogto ah (1 MHz)		-	≤5.5	4.7	≤5.5	4.8	≤5.5	4.7
8	Iska caabin Arc		s	-	-	-	182	-	-
9	Caddaynta iska caabbinta dabagalka (PTI)		V	-	-	-	600	-	-
10	Iska caabbinta dahaarka ka dib marka la geliyo biyaha		MΩ	≥5.0×104	3.8 x106	≥5.0×104	1.8 x107	≥5.0×104	7.1 x106
11	Daboolida		Darajo	V-0	V-0	V-0	V-0	-	-
12	Tilmaanta Heerkulka (TI)		-	≥155		≥155		≥180

Baakadaha iyo Kaydinta

Go'yaasha waa in lagu kaydiyaa meel heerkulkeedu aanu ka sarreyn 40℃, waxaana lagu dhejiyaa si toosan sariirta sariirta oo dhererkeedu yahay 50mm ama ka badan. Ka fogow dabka, kulaylka (qalabka kulaylinta) iyo qorraxda tooska ah. Nolosha kaydinta xaashida waa 18 bilood laga bilaabo taariikhda ka bixitaanka warshadda. Haddii muddada kaydinta ay ka badan tahay 18 bilood, badeecada sidoo kale waa la isticmaali karaa ka dib marka la tijaabiyo si loogu qalmo.

Hadalada iyo Taxadirka Codsiga

1 Mashiinku waa inuu u hoggaansamaa JB/Z141-1979,Hababka farsamaynta ee dahaarka alaabta la dahaadhay, sababtoo ah xaashiyadu waxay leeyihiin farqi u dhexeeya sifo birta.

2 Xawaaraha sare iyo qoto dheer ee goynta yar waa in lagu dabaqaa marka mishiinada la samaynayo sababtoo ah xaashida kulaylka daciifka ah.

3 Mashiinka iyo goynta alaabtan waxay sii dayn doontaa boodh iyo qiiq badan. Tallaabooyin ku habboon waa in la qaado si loo hubiyo in heerarka boodhka ay ku jiraan xad la aqbali karo inta lagu jiro hawlgallada. Hawo-qaadka qiiqa maxalliga ah iyo isticmaalka boodhka/maaskarada ku habboon ayaa lagula talinayaa.

4 Go'yaalku waxay ku xiran yihiin qoyaan ka dib marka mashiinada la sameeyo, dahaarka dahaarka ayaa lagula talinayaa.

Qaybaha mashiinada Epoxy(1)
qaybaha mashiinka (1) (1)

Qalabka Wax-soo-saarka

3240 (7)
3240 (8)
3240 (9)
3240 (10)

Xidhmada Xaashiyaha EPGC

3240 (12)
3240 (11)
Waxaan had iyo jeer ku siinnaa mid ka mid ah adeeg bixiyayaasha macmiilka ee ugu damiirka badan, iyo sidoo kale noocyo kala duwan oo naqshado iyo qaabab leh agabka ugu wanaagsan. Hindisahan waxaa ka mid ah helitaanka naqshadaha la isku habeeyay ee xawaaraha iyo dirista Shiinaha OEM Thermal Sheet Fiberglass Sheet G10 G11 Epgc308, Daacadnimada waa mabda'ayada, hawlgalka xirfadeed waa shaqadeena, adeeggu waa hadafkeena, iyo qanacsanaanta macaamiisha waa mustaqbalkeena!
Shiinaha OEMShiinaha Epoxy Epgc202 Sheet iyo Fr4 Sheet, Ahaanshaha xalalka ugu sarreeya ee warshadeena, xalalkayada taxanaha ah ayaa la tijaabiyey oo nagu guuleystey shahaadooyin maamul oo khibrad leh. Si aad u hesho cabbiro dheeraad ah iyo faahfaahinta liiska shayga, hubi inaad gujiso badhanka si aad u hesho macluumaad dheeraad ah.